Heavy Duty Clutch Assembly with 1" Bore & #40/41/420 Chain Sprocket for Go-Karts & Mini Bikes (Missing Hardware) Go-Karts This caster uses two pre-installed

This caster uses two pre-installed 7/16 1607-RS bearings

Switch: Short black wire w/ loop connector to switch mount bolt ground

SHDASMB5309 (Red)

8A 3-pin IEC 320 C13 battery charger is a great choice

it's just missing some of the hardware that secures the sprocket and chain plate guide

Heavy Duty Clutch Assembly with 1" Bore & #40/41/420 Chain Sprocket for Go-Karts & Mini Bikes (Missing Hardware) Go-Karts This caster uses two pre-installedNote: This clutch is missing the set screws. Our heavy duty clutch assembly with a 1" bore and a #40 41 420 chain sprocket for go karts and mini bikes may be just the part that you need for that perfect garage built motorsports project. The 1" bore allows this clutch to work with gas engines larger than 6. 5 Hp. The sprocket side of the bore is stepped down to 1 2". In addition, the drive sprocket is made for use with the common 40 41 420 chain size.